Transport solutions to store and transport your stand safely and securely!

Our transport solutions are designed to transport your stand to your exhibition site easily and conveniently.
Your frames and graphics stay protected thanks to these reinforced and waterproof solutions. There is a customized and ergonomic transport solution for every stand!

panoramic c-line

stackable.crate

To transport your custom panoramic c-line stand, our design office will tell you how many stackable crates are required for your stand volume. These crates are available on single wheeled dollies (for up to three creates) or double wheeled dollies (up to 6 crates) to facilitate travel. Inside, the various components of your stand are completely protected.

Exterior dimensions: L 400 mm x D 2575 mm x H 260 mm
Weight: 77 kg

panoramic h-line

h-line H1.crate

The H1 crate is designed to easily transport your panoramic h-line modular stand. Everything you need is contained in this crate. The pre-assembled modules of your panoramic h-line modular stand are secured between the rails, and the crate can hold up to 14 frames. All you have to do is take them out and assemble them with the connector!

Volume: 3.05 m3
Empty weight: 149 kg
Capacity (no. of frames*): 14.75*
Exterior dimensions: W 820 mm x L 2620 mm x H 1420 mm
Wrap crate: yes
Transport: utility vehicle with a tailgate or ramp

* 1 frame = 96 cm, equivalent to 2 x 48 cm frames or 4 x 24 cm frames

h-line H2.crate

The H2 crate works according to the same principle as the H1 crate, except that it can hold up to 12 frames distributed among three small crates, which allows for even easier handling and transport. It is ideal for your modular stands destined for trade shows, as well as for display in conference halls, hotels and multi-level spaces.

Volume: 2.82 m3
Empty weight:
110 kg
Capacity (no. of frames*):
12 (3×4)
Exterior dimensions:
W 740 mm x L 2650 mm x H 1440 mm
Wrap crate:
yes
Transport:
utility vehicle without a tailgate or ramp

h-line H4.crate

The H4 crate works according to the same principle as the H1 and H2 crates, except that it can hold up to 8 frames distributed among two small crates, which allows for even easier handling and transport.
It does not contain an “accessories” section and therefore serves mainly as a complementary item for the H2 crate.

Volume: 1.68 m3
Empty weight:
80 kg
Capacity (no. of frames*):
8 (2×4)
Exterior dimensions:
W 520 x L 2 575 x H 1220 mm
Wrap crate:
yes
Transport:
utility vehicle without a tailgate or ramp

bagagerie

panoramic p-line

Wheeled.bag

Store and transport your panoramic p-line portable stand and your tubular hanging signs safely and securely with our TRB011 transport case.
This wheeled transport case is designed to transport portable configurations in sizes ranging from 9-18 m2.
You can also add a soft profile cover (maximum of 2 per case) to protect your profiles.

Exterior dimensions: 380 mm x 240 mm x 1350 mm
Weight: 10 kg
Max load: 30 kg

contour. wheeled case

Transport your contour. fabric tubular stand easily with our TRB037 wheeled transport case. The wedge clips are used to store and secure the aluminum tubes in place.

Exterior dimensions: 330 mm x 1235 mm x 225 mm
Weight: 3.4 kg

Other stands

Signs

Counters

Stand accessories

Menu